Screws are partner which are remotely hung and are depended upon to drive openings through the collected parts. These locks can be either fixed or passed on by torqueing a nut. High Tensile Stud Manufacturer produce these reels from high strength carbon steel or from tempered composite steel.
High Tensile Fasteners, High Tensile Fasteners Manufacturers, High Tensile Fasteners Exporters, High Tensile Fasteners Suppliers, High Tensile Fasteners Stockists. High Tensile Nut Bolt Manufacturers In India, Supplies A Full Range Of High Tensile Nuts At Factory Price In India.
When restricted from standard screws, these high strength locks have an expansive strength for the most part of around 25% to half more. Tensile strength of a composite or metal is in like manner proposed as its specific undaunted nature or UTS. This determined nature infers the most uncommon degree of weight a shock can endure before it slumps shockingly in its show. Unequivocally when stress is added to a mechanical catch past their strength, these catch might bomb appallingly, at any rate the extra weight might make the got break too.
High Tensile Fasteners Manufacturers in Mumbai, High Tensile Fasteners Exporters in Mumbai, High Tensile Fasteners Suppliers in Mumbai, High Tensile Fasteners Stockists in Mumbai, High Tensile Bolts Manufacturers In India, Carries A Complete Line Of High Tensile Bolts, High Tensile Stud In Mumbai, India.
Omaa Metal Sources, The degree of weight each affix can endure is portrayed by its assessment. The assessment of the lock or flounder is reviewed using power per unit district. For example, a 8.8 examination high sensible waver can persist through a heap of 45 to 49.9 metric tons for each 6.45 cm².
Since these High Tensile Bolts and overhauls have a higher perseverance inquisitively with a typical screw, they are unfathomably more acclaimed and are used in various applications.Many high adaptable screws or secure that are open in the market are a blackish covered blend. This slight tone is a portraying brand name that occurs by the course toward making these strong dazes by the High Tensile Bolts Manufacturers In India. Regardless, when High Tensile Nut Bolt Manufacturers In India need to offer their customers astounding present day evaluation get, they will with everything considered go past the dull changed accessory and consider selling the suppliers with get that have been set up by zinc plating.
Zinc without assistance from some other individual is a genuine kind of plating used on high versatile shocks. It is unimaginably phenomenal considering the way that it will when everything is said in done refresh the qualities of these High Tensile Bolts . Such a Zinc plating goes with various tendencies, for instance, unmatched use block. Other than its use resistance, these high resolute nature dazes offer security from white oxidation spots, which might make later some time accepting that the shocks are familiar soddenness. Close by these features, Zinc plated High Tensile Bolts are incomprehensibly reasonable.
High Tensile Fasteners Specification
High Tensile Fasteners Grades |
Grade 10.9, Grade 8.8, DIN 933 Grade 12.9 |
High Tensile Fasteners Standard |
IS 1364 / IS 1363 & DIN EN ISO 4014 & 4017 DIN 931 / 933 |
High Tensile Fasteners Size |
Dia M 20 to 100 mm Inch 3/4" to 3.1/2" |
High Tensile Fasteners finish |
Zinc plated / Plain / Hot dip galvanised |
High Tensile Bolts Dimensions
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2.5 |
3 |
3.5 |
4 |
4.5 |
5 |
||||||||
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
Head Across Flat (S) Nom = Max Min Grade A Grade B |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
58.8 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Head Height (K) Nom Tol + or – Grade A Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
8.8 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
Across corners e Min Grade A Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
Thread Length (b) For lengths < or = 125mm For lengths > 125mm <= 200mm For lengths > 200mm |
14 |
16 |
18 |
22 |
26 |
30 |
34 |
38 |
42 |
46 |
50 |
54 |
60 |
66 |
Not specified as full thread recommended |
||||||
20 |
22 |
24 |
28 |
32 |
36 |
40 |
44 |
48 |
52 |
56 |
60 |
66 |
72 |
78 |
84 |
90 |
96 |
102 |
108 |
116 |
|
33 |
35 |
37 |
41 |
45 |
49 |
53 |
57 |
61 |
65 |
69 |
73 |
79 |
85 |
91 |
97 |
103 |
109 |
115 |
121 |
129 |
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
5 |
4.5 |
|
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
Head Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
Head height (K) Min Max |
0.166 |
0.208 |
0.250 |
0.292 |
0.333 |
0.365 |
0.407 |
0.480 |
0.563 |
0.636 |
0.710 |
0.790 |
0.880 |
0.960 |
1.110 |
1.270 |
0.176 |
0.218 |
0.260 |
0.302 |
0.343 |
0.375 |
0.417 |
0.500 |
0.583 |
0.666 |
0.750 |
0.830 |
0.920 |
1.000 |
1.170 |
1.330 |
|
Across corners e Max |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
Thread Length b Min |
Twice the Dia (2D) |
|||||||||||||||
Major Dia at thread BSW (min) |
0.2427 |
0.3046 |
0.3666 |
0.4285 |
0.4904 |
0.5527 |
0.6147 |
0.7390 |
0.8653 |
0.9897 |
1.1140 |
1.2388 |
1.4879 |
1.7369 |
1.9862 |
|
Major Dia at thread BSW (max) |
0.2488 |
0.3112 |
0.3736 |
0.4360 |
0.4985 |
0.5609 |
0.6233 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.500 |
1.750 |
2.000 |
|
Major Dia at thread BSF (min) |
0.2432 |
0.3051 |
0.3671 |
0.4290 |
0.4910 |
0.5533 |
0.6153 |
0.7394 |
0.8658 |
0.9902 |
1.1148 |
1.2395 |
1.3640 |
1.4888 |
1.7380 |
1.9876 |
Major Dia at thread BSF (max) |
0.2489 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5610 |
0.6234 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.375 |
1.500 |
||
High Tensile Hex Bolts Unc/Unf Threads To Bs 1768-1963
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
Head Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
Head Height (K) Min
Max |
0.153 |
0.201 |
0.233 |
0.281 |
0.313 |
0.361 |
0.393 |
0.463 |
0.543 |
0.597 |
0.678 |
0.773 |
0.838 |
0.934 |
1.074 |
1.203 |
0.163 |
0.211 |
0.243 |
0.291 |
0.323 |
0.371 |
0.403 |
0.483 |
0.563 |
0.627 |
0.718 |
0.813 |
0.878 |
0.974 |
1.134 |
1.263 |
|
Across corners e (MAX) |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
Thread Length b (Min) |
2D + 1/4” upto bolt length of 6” and 2D + 1/2” for bolt lengths above 6” |
|||||||||||||||
Major Dia at thread ( Class 2A) Min for UNC |
0.2408 |
0.3026 |
0.3643 |
0.4258 |
0.4876 |
0.5495 |
0.6113 |
0.7353 |
0.8592 |
0.9830 |
1.1064 |
1.2314 |
1.3544 |
1.4794 |
1.7268 |
1.9751 |
Major Dia at thread (2A) Min for UNF |
0.2425 |
0.3042 |
0.3667 |
0.4281 |
0.4906 |
0.5524 |
0.6149 |
0.7391 |
0.8631 |
0.9868 |
NOT RECOMMENDED |
|||||
Major Dia at thread Class 2A Max for UNC |
0.2490 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5609 |
0.6234 |
0.7482 |
0.8731 |
0.9980 |
1.1228 |
1.2478 |
1.3726 |
1.4976 |
1.7473 |
1.9971 |
High Tensile Washers Dimensions
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
HARDNESS FOR PL. WASHER |
35 TO 45 HRC |
||||||
Hardness for Hot Dip Galvd washer |
26 HRC |
||||||
Outer Dia (Max) d2 |
34 |
42 |
44 |
50 |
56 |
60 |
72 |
Inner Dia (Min) d1 |
18 |
22 |
24 |
26 |
30 |
33 |
39 |
Thickness (S) |
3.1 TO 4.6 |
||||||
Tolerance for OD Minus(-) |
1.6 |
1.9 |
|||||
Tolerance for ID Plus(+) |
0.43 |
0.52 |
0.62 |
||||
Hardened And Tempered Washers To Din 6916
DIA |
M12 |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
Weight in Kgs for 100 nos |
0.703 |
1.46 |
1.96 |
2.43 |
3.06 |
5.02 |
6.32 |
11.50 |
Outer Dia (Max) d2 |
24 |
30 |
37 |
39 |
44 |
50 |
56 |
66 |
Inner Dia (Min) d1 |
13 |
17 |
21 |
23 |
25 |
28 |
31 |
37 |
Thickness (S) |
3 |
4 |
4 |
4 |
4 |
5 |
5 |
6 |
Tolerance for OD Minus(-) |
0.52 |
0.62 |
1 |
1.20 |
||||
Tolerance for ID Plus(+) |
0.27 |
0.33 |
0.52 |
0.62 |
||||
Tolerance for thickness + or – |
0.30 |
0.60 |
||||||
Dimensions of High Strength Nut
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
Across Flat (S) Max Min |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
58.8 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Thickness (M) Max Min |
3.2 |
4.7 |
5.2 |
6.8 |
8.4 |
10.8 |
12.8 |
14.8 |
15.8 |
18 |
19.4 |
21.5 |
23.8 |
25.6 |
28.7 |
31 |
33.4 |
34 |
36 |
38 |
42 |
2.9 |
4.4 |
4.9 |
6.44 |
8.04 |
10.37 |
12.1 |
14.1 |
15.1 |
16.9 |
18.1 |
20.2 |
22.5 |
24.3 |
27.4 |
29.4 |
31.8 |
32.4 |
34.4 |
36.4 |
40.4 |
|
Across corners (E) Min |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.35 |
26.75 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
Minor Dia at thread (min) |
3.242 |
4.134 |
4.917 |
6.647 |
8.376 |
10.106 |
11.835 |
13.835 |
15.294 |
17.294 |
19.294 |
20.752 |
23.752 |
26.211 |
29.211 |
31.67 |
34.67 |
37.129 |
40.129 |
42.587 |
46.587 |
Minor Dia at thread (max) |
3.422 |
4.334 |
5.153 |
6.912 |
8.676 |
10.441 |
12.210 |
14.210 |
15.744 |
17.774 |
19.774 |
21.252 |
24.252 |
26.771 |
29.771 |
32.27 |
35.27 |
37.799 |
40.799 |
43.297 |
47.297 |
High Tensile Hex Nuts In Bsw/Bsf Threads To Bs 1083-1965 Threads To Bs 84
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
– |
6 |
5 |
4.5 |
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
WIDTH Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
Thickness (M) Min Max |
0.190 |
0.240 |
0.302 |
0.365 |
0.427 |
0.490 |
0.552 |
0.677 |
0.740 |
0.865 |
0.990 |
1.105 |
1.230 |
1.355 |
1.605 |
1.730 |
0.200 |
0.250 |
0.312 |
0.375 |
0.437 |
0.500 |
0.562 |
0.687 |
0.750 |
0.875 |
1.000 |
1.125 |
1.250 |
1.375 |
1.625 |
1.750 |
|
Across corners (Max inches) |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
Minor Dia at thread BSW (min) |
0.1860 |
0.2413 |
0.2950 |
0.3461 |
0.3932 |
0.4557 |
0.5086 |
0.6220 |
0.7328 |
0.8400 |
0.9420 |
1.0670 |
– |
1.2866 |
1.4938 |
1.7154 |
Minor Dia at thread BSW (max) |
0.2030 |
0.2594 |
0.3145 |
0.3674 |
0.4169 |
0.4794 |
0.5338 |
0.6490 |
0.7620 |
0.8720 |
0.9776 |
1.1026 |
– |
1.3269 |
1.5408 |
1.7668 |
Minor Dia at thread BSF (min) |
0.2008 |
0.2543 |
0.3110 |
0.3663 |
0.4200 |
0.4825 |
0.5336 |
0.6432 |
0.7586 |
0.8720 |
0.9828 |
1.1078 |
1.2150 |
1.3400 |
1.5670 |
1.8170 |
Minor Dia at thread BSF (max) |
0.2125 |
0.2684 |
0.3280 |
0.3844 |
0.4395 |
0.5020 |
0.5549 |
0.6669 |
0.7838 |
0.8990 |
1.0120 |
1.1370 |
1.2470 |
1.3720 |
1.6026 |
1.8526 |
High Tensile Hex Nuts In Unc/Unf Threads To Bs 1768-1963 Threads To Bs 1580
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
Width Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
Thickness (M) Min Max |
0.214 |
0.261 |
0.323 |
0.370 |
0.432 |
0.479 |
0.542 |
0.631 |
0.740 |
0.844 |
0.949 |
1.037 |
1.147 |
1.251 |
1.470 |
1.684 |
0.224 |
0.271 |
0.333 |
0.380 |
0.442 |
0.489 |
0.552 |
0.651 |
0.760 |
0.874 |
0.989 |
1.087 |
1.197 |
1.311 |
1.530 |
1.754 |
|
Across corners (E) Max |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
Minor Dia at thread (min) UNC (2B) |
0.1960 |
0.2520 |
0.3070 |
0.3600 |
0.4170 |
0.4720 |
0.5270 |
0.6420 |
0.7550 |
0.8650 |
0.9700 |
1.0950 |
1.1950 |
1.3200 |
1.5340 |
1.7590 |
Minor Dia at thread (max) UNC (2B) |
0.2070 |
0.2650 |
0.3210 |
0.3760 |
0.4340 |
0.4900 |
0.5460 |
0.6630 |
0.7780 |
0.8900 |
0.9980 |
1.1230 |
1.2250 |
1.3500 |
1.5680 |
1.7950 |
Minor Dia at thread (min) UNF (2B) |
0.2110 |
0.2670 |
0.3300 |
0.3830 |
0.4460 |
0.5020 |
0.5650 |
0.6820 |
0.7980 |
0.9100 |
NOT RECOMMENDED |
|||||
Minor Dia at thread (max) UNF (2B) |
0.2200 |
0.2770 |
0.3400 |
0.3950 |
0.4570 |
0.5150 |
0.5780 |
0.6960 |
0.8140 |
0.9280 |
||||||
High Strength Friction Grip Hex Nuts In Mm Threads To Is 6623-1985 Grades 8s & 10s
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
Pitch |
2 |
2.5 |
2.5 |
3 |
3 |
3.5 |
4 |
Head Across Flat (B) Min |
26.16 |
33 |
35 |
40 |
45 |
49 |
58.8 |
Head Across Flat (B) Max |
27 |
34 |
36 |
41 |
46 |
50 |
60 |
Height (H) Min Max |
16.4 |
19.4 |
22.3 |
22.9 |
26.3 |
29.1 |
35 |
17.1 |
20.7 |
23.6 |
24.2 |
27.6 |
30.7 |
36.6 |
|
Across corners C min |
29.56 |
37.29 |
39.55 |
45.20 |
50.85 |
55.37 |
66.44 |
Minor Dia at thread (min) |
14.235 |
17.694 |
19.694 |
21.202 |
24.252 |
26.761 |
32.270 |
Minor Dia at thread (max) |
14.610 |
18.144 |
20.144 |
21.702 |
24.752 |
27.321 |
32.870 |
Dimensions of High Tensile Hex Screw
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
Head Across Flat (S) Max Min(Grade A) Min (Grade B) |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
58.8 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Head Thickness (K) Tol + or – Grade A
Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
8.8 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
Across corners e Min Grade A
Min Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
Size Chart of High Tensile Bolts
High Tensile Fasteners Other Types
DIN 933 Grade 12.9 Bolts |
High Tensile Automotive Bolts |
High Tensile Coach Bolts Manufacturer |
Button Head Bolts Stokist |
DIN 933 Grade 12.9 Toggle Bolts |
High Strength Bolts |
High Tensile Fasteners & Bolts |
High Tensile Deck Bolts |
Allen Head Bolts Wholesaler |
High Tensile Header Bolts Distributor |
High Tensile Barrel Nuts |
High Tensile Rivet Nuts |
High Tensile Weld Nuts |
High Tensile Wheel Nuts |
High Tensile Flat Head Bolts |
High Tensile Hurricane Bolts |
High Tensile Gutter Bolts |
Hook Bolts Manufacturer |
High Tensile Cap Head Bolts |
High Tensile Exhaust Bolts Supplier |
Application of High Tensile Fasteners
- High Tensile Bolts And Nuts uses in Pharmaceuticals
- HT U Bolts uses in Spiral Welded tube for burner pipes and flues
- HT Anchor Bolts uses in Heat Exchangers
- High Tensile Bolts uses in Off-Shore Oil Drilling Companies
- High Tensile Nuts uses in Specialty Chemicals
- High Tensile Steel Fasteners uses in Aircraft Exhaust Manifolds
- HT Fasteners uses in Power Generation
- High Tensile Bolts Fasteners uses in Gas Processing
- High Tensile Fasteners uses in Pharmaceutical Equipment
- High Tensile Studs uses in Petrochemicals
- High Tensile Threaded Rod uses in Sea Water Equipment