Omaa Metal Sources make and deftly a rich course of action of Carbon Steel Valves that are utilized to control the flood of fluid in the valves. These things are stunning to give settling and we offer them with different quality credits to the customers.
Carbon Steel Valves, Carbon Steel Valves Manufacturers, Carbon Steel Valves Exporters, Carbon Steel Valves Suppliers, Carbon Steel Valves Stockists.
We are no question the best provider, stockiest, sellers and exporters of choice nature of Carbon Steel Ball Valves which has tracked down its application in various parts over the world.
Carbon Steel Valves Manufacturers in Mumbai, Carbon Steel Valves Exporters in Mumbai, Carbon Steel Valves Suppliers in Mumbai, Carbon Steel Valves Stockists in Mumbai.CARBON STEEL A105 BUTTERFLY VALVES MANUFACTURER, CARBON STEEL A350 LF2 BALL VALVES SUPPLIER, CARBON STEEL VALVES, CS VALVE SUPPLIER IN INDIA.
Carbon Steel Ball Valves is a quarter-turn rotational improvement valve that utilizes a ball-framed float to stop or start stream. Accepting that the valve is opened, the ball swings to where the opening through the ball is as shown by the valve body sound and source. Expecting the valve is closed, the ball is turned with the genuine that the opening is in reverse to the stream openings of the valve body and the stream is done.
Carbon Steel Ball Valves are on a very basic level expected to start or stop stream, and when a straight-line stream of fluid and least stream impediment are required. In alliance, these valves all around are either totally open or thoroughly close.
The plate of a Carbon Steel Ball Valves is completely taken out when the valve is totally open; the circle is totally drawn up into the valve Bonnet. This leaves an opening for course through the valve at the tantamount inside pack across completed as the line structure where the valve is showed up. A Carbon Steel Ball Valves can be used for a wide gathering of liquids and gives a tight seal when closed.
Standards : API 609 | BS-5351 | ISO 17292
Seat & Seals : PTFE | Reinforced PTFE | Buna-N | Graphoil | Graphite
Material of Construction : CI | CS | SS | AS | A 105 | CF3 | CF3M | CN7M
End Connection : Screwed to BSP | BSPT | NPT | Socket Weld | Butt Weld with extended Nipple | Flanges Ends | Butt Weld Ends
Pressure Ratings : ASA 150# | 300# | 600# | 800# | 900# | 1500# | 2500#
Operation : Lever | Gear | Electrical Actuator | Pneumatic Rotary Actuator
Sizes : 6mm to 750mm
gives Carbon Steel Ball Valves that has been used in different endeavors because of its confusing segments. We also give Carbon Steel Ball Valves in different assessments, sizes, task and so on as shown by customers basics with the ultimate objective that it can profit our customers.
Carbon Steel Valves Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS |
| CS | 1.0460 | K03504 |
Carbon Steel Valves Chemical Compositions
| Grade | Ni | C | Mn | Si | Cu | Cr | Mo | S | P |
| CS | 0.40 Max | 0.30 Max | 0.60 – 1.35 | 0.15 – 0.30 | 0.04 Max | 0.30 Max | 0.12 Max | 0.040 Max | 0.035 Max |
Carbon Steel Valves Mechnical Properties
| Element | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| CS | 70,000 (485) | 36,000 (250) | 30 % |
Types :
Cast and Forged Gate Valves
Cast and Forged Globe Valves
Needle Globe Valves
Cast and Forged Swing Check Valves
Lift Check Valves
Ball Check Valves
Wafer Check Valves
Inline Check Valves
Cast and Forged One Piece Ball, Two Piece Ball, Three Piece Ball Valves
Fire Safe Ball Valves
Standard/Full Port Ball Valves
Seal Welded Ball Valves
Trunnion Mounted Ball Valves
Cast and Forged Y-Strainers
Cast Knife Gate Valves
Pressures :
ANSI Class: 150 thru 2500
Cast Knife Gate Valves
End Connections :
Threaded, Flanged, Socketweld, RF, RTJ, Butt Weld, Grooved